Autoplay
Autocomplete
Previous Lesson
Complete and Continue
MikroTik Enterprise Wireless Engineer with LABS
WLAN Fundamental
1- Introduction WLAN Fundamental (1:10)
2- Understand the Wireless terminology (12:32)
Wireless Tools on MikroTik
3- Introduction to Wireless Tools on MikroTik (0:54)
4- Frequency usage - Spectral Scan - Spectral History (13:15)
5- MikroTik Wireless Alignment tool (8:45)
6- Wireless Snooper and Sniff Tool (13:16)
7- Wireless Scan Tool and Reset Configuration (8:29)
Wireless Frequency mode and TX power change
8- Introduction to Wireless Frequency mode (1:19)
9- MikroTik Frequency modes Regulatory-domain Manual Tx power Superchannel (13:43)
10- Changing the TX power for a better signal reception (10:36)
MikroTik Wireless Data rate and chains
11- Introduction to Wireless data rate and chains (1:04)
12- Wireless Chains and difference between SISO and MIMO (9:18)
13- Avoid Data Rate flapping using the basics and supported data rate options (13:43)
Wireless Link Quality - Troubleshooting
14- Introduction - Wireless Link troubleshooting (1:08)
15- Wireless SNR CCQ and HW Frames (19:22)
16- Advanced Distance Noise Floor Threshold and HW Fragmentation Threshold (9:32)
17- RTS CTS CTS to Self HW protection Threshold and Adaptive Noise Immunity (14:48)
Channel Width, Channel Bonding & Guard interval
18- Introduction - What is channel width channel bonding and guard interval (1:04)
19- Channel Width and Channel Bonding (11:31)
20- Changing the Guard interval for more or less throughput (17:53)
MikroTik Wireless Repeater
21- Introduction What is a wireless repeater (1:00)
22- Configuring the router as a wireless repeater using the repeater setup (10:06)
Wireless Security
23- Introduction to Wireless Security (1:37)
24- Wireless security using Dynamic Static keys and EAP (20:37)
25- Management Protection to forbid De-authentication attacks on Wireless (7:41)
26- Default Authenticate and Access list (18:47)
27- Connect list to allow the station to connect to the right AP (17:38)
CAPsMAN
28- Connecting all CAPs to the CAPsMAN (21:14)
29- Configuring Channels on the CAPsMAN (16:28)
30- Configuring security profiles on the CAPsMAN (5:53)
31- Configuring Datapaths on the CAPsMAN (18:28)
32- Configuring Configuration Containers on the CAPsMAN (15:25)
33- Configuring Provisioning on the CAPsMAN (13:36)
34- Configuring VLANs on the CAPsMAN and assign it to different wireless networks (14:36)
35- Upgrading the CAPs softwares from the CAPsMAN (21:15)
36- Configuring Access List on the CAPsMAN (14:47)
37- Configuring a CAPsMAN Backup for Automatic failover (23:44)
MikroTik official trainings with Maher Haddad (3:27)
28- Connecting all CAPs to the CAPsMAN
Complete and Continue
Lesson Content Locked
Your session expired. Please sign in again to continue.
Login